Gator Seat Belt Instructions

1. Using a screwdriver and the small screw that is taped to the instruction manual packet, fasten the tap on the middle of the seat belts to the underside of the seat by tightening the screw through the tab and into the hole in the seat. NOTE: Be sure to position the tab so that the release buttons face up.

2. Attach both ends of the seat belt by sliding the black triangular plastic piece over the yellow nub on each side. NOTE: Be sure that the seat belts are positioned so that the words :John Deere" can be read correctly and are not upside down and the belts are not twisted.