Hi gear on pedal (black seats (2012-2014)

1. Remove the 4 screws of the shifter cover.
2. Remove the shifter base from the body of the unit. Lift and turn the shifter cover sideways and push back toward the seats out of the way. In the front of the shifter base place a screw driver between the 2 grey tabs in front of the black plastic and pry shifter up.
3. Disconnect red block from shifter assembly.
4. Plug in new shifter assembly into red plug. Push each individual wire into the red cube to ensure a tight connection.
5. Insert the rear shifter base tab into the body of the toy.
6. Place screw driver in front center of shifter, shown with large arrow. Pry screw driver back while pushing down in front of shifter base until the 2 smalls tabs on each side of the shifter go under the body to hold the shifter toy.
7. Replace shifter cover and insert the 4 screws.

Hi gear on the shifter (2 switches 2015- February 2017)

1. Remove the 4 screws of the shifter cover.
2. Remove the shifter base from the body of the unit. Lift and turn the shifter cover sideways and push back toward the seats out of the way. In the front of the shifter base place a screw driver between the 2 grey tabs in front of the black plastic and pry shifter base up to remove.
3. Disconnect red block and white block from shifter assembly.
4. Plug in RED and WHITE block into new shifter assembly. The RED goes toward the front of the toy and the WHITE towards the back of the toy as shown. Push each individual wire into the cubes to ensure a tight wire connection.
5. Insert the rear shifter base tab into the body of the toy as shown. Then lower front of shifter flush with unit.
6. Place screw driver in front center of shifter, shown with large arrow. Pry screw driver back while pushing down in front of shifter base until the 2 small tabs on each side of the shifter go under the body to hold the shifter to toy.
7. Replace shifter cover and insert the four screws. Finished.