The following procedure explains the recommended method of removing and replacing a wheel on your Gaucho Grande electric toy.

WARNING: Disconnect the battery prior to beginning this procedure.

1. At the wheel being replaced, remove the red center cap.
2. Remove the lock nut and washer. It will be necessary to hold the nut at the opposite end of the axle. Otherwise the axle will turn freely. Remove the wheel.
3. Pull the old wheel off the axle.
4. If replacing a rear wheel remove the inner hub and install it in the new wheel.
5. Slide the new wheel into the axle. If you are placing a rear wheel, be sure the hex drive on the motors seats fully into the hex shaped inner hub.
6. Secure the wheel to the toy using the lock nut and washer.
7. Install to center cap.
8. Connect the battery and test the toy: Be sure the wheels turn freely and do not wobble during rotation.